
Minolta Hi-Matic F
My project of bringing back to life the film cameras I have “met” in the past continues.
If you want to dig into the history of this camera family: The family of Minolta Hi-Matic cameras (Italian and English edition, on amazon.it).
Minolta Hi-Matic F
In the 1960s Minolta made a line of consumer 35mm rangefinder cameras with automatic exposure metering, one of the first of its kind: the Hi-Matic series.
These cameras became quite famous thanks to John Glenn, who took one into space in 1962 (a specially modified version).
In 1972 Minolta released the F version (in silver and black), with a Rokkor 38mm f/2.7 lens that was well regarded at the time. The camera is compact and has a few fewer features than other models in the series, but it was noticeably cheaper.

Guide numbers and distances for using the flash
Main specifications:
- Lens: Rokkor 1:2.7 / 38mm (4 elements)
- Film: 35mm, from 25 to 500 ASA
- Exposure: cadmium sulfide (CdS) meter coupled to the shutter (so it needs a battery)
- Shutter speeds: 4 s to 1/724 s (1/20 s with flash), Seiko ESL electronic shutter
- Viewfinder: simple rangefinder
- Flash: GN (7–56, in meters)
- Weight: 360 g (12.7 oz) without battery
- Batteries: 2 × 1.35 V PX640 mercury cells
- Dimensions: 113 × 73 × 54 mm
- Minimum focus distance: 0.8 m (2.6 ft)
- Wide Rokkor 38mm f/2.7 lens with electronic shutter
I found a copy of the manual (a set of scanned JPGs), but this is where the trouble starts. I had the light seals replaced and the camera thoroughly cleaned, but without a battery it is useless: there are no manual exposure controls!
The PX640 battery is no longer available: mercury batteries stopped being made worldwide at the end of the 1980s because of their environmental impact (and their toxicity).
Update November 2026: today there is a ready-made solution. You can buy PX640 adapters that take common 675 zinc-air cells (the ones used in hearing aids) and provide a steady voltage of about 1.35–1.4 V, which is what the light meter was designed for. They are easy to find in Europe too: just search for “PX640 adapter” (you need two; also on AliExpress). This is what I recommend before trying any DIY solution.
Using the wrong batteries can, at best, give you badly exposed pictures (the shutter will not keep the right speeds). The real risk is damaging the light meter.

A battery compatible with the PX640
Of course you can buy 1.35 V batteries, but some users report an exposure error of as much as 2 stops (both in shadows and highlights).
Others suggest using 1.5 V batteries and overexposing by about one stop: the only control available is the film speed (ASA) dial, so you set it slightly lower.
If you know an experienced camera repairer, you can ask them to recalibrate the metering circuit for modern 1.5 V PX625A batteries. But it is not an easy job.
First of all, the PX640 is also sold under these names:
PX640A / A640PX / EN640A / EPX640A / PC640A / LR52 / 1126A
The apparently simplest choice would be to buy this battery from the UK. You can also find it on eBay. Be aware, though: the PC640A is a 1.5 V alkaline cell, not 1.35 V like the original.
There are adapters for easier-to-find modern batteries (such as LR44/AG13 (also on AliExpress) or MS76). Today they are also easy to find in Europe. What matters is that these adapters take 1.5 V batteries and lower the voltage to 1.35 V: that seems to be the key to getting correct exposures.
Online you can also find solutions that use SR44 (also on AliExpress) (1.55 V, silver oxide), LR44 (alkaline, 1.5 V) or 675 cells (the hearing-aid kind, which however run out very quickly).
For example, you can build your own adapter for SR44/A76 batteries (some people just wrapped them in aluminum foil…);
or fit 675 (also on AliExpress) or LR44/AG13 batteries into a piece of tube cut to the right thickness;
or use LR44s with a couple of 1-cent coins; someone apparently used 4 × Varta V625U.
In the end, this is the solution my camera repairer came up with:

What you need:
- Some paper tape
- 2 × LR44/AG13 batteries
- A plastic tube with an outer diameter of 16 mm and an inner diameter of at least 12 mm (roughly): electrical conduit from a hardware store works fine.
- A piece of metal.
The procedure is simple:
- stack the two batteries;
- wrap them with paper tape to hold them together and build up the right thickness;
- put them in a piece of tube about 1 cm high;
- fit the piece of metal, bent into a “C” shape, into the battery compartment so that it bridges the contacts of one battery slot.
Done. You have made a 3 V battery that replaces two 1.35 V cells, and changed the contacts so it works.
The camera turns on.
Update November 2026: two LR44s in series give about 3 V, compared with 2.7 V from the two original PX640s. The camera works, but the light meter may get the exposure wrong. With adapters for 675 cells this problem goes away.
As an Amazon Associate I earn from qualifying purchases. Some links (Amazon and AliExpress) are affiliate links: they cost you nothing and help keep this blog running.

Recent comments